IP65 Stadium LED Display and Outdoor LED Billboard with 960×960mm Cabinet and 7,500 nits Daylight Brightness

An outdoor LED display is a weather-sealed, high-brightness screen that shows advertising, pricing and brand content to people in daylight. This model — the FB960 Series — is a 960 × 960 mm aluminium-cabinet LED billboard rated IP65 and 7,500 nits, available in P6, P8 and P10 pixel pitches. It is built for fixed outdoor advertising installs: roadside billboards, building façades, retail exteriors, transport hubs and event venues.

If you are comparing outdoor LED screens for a paid-media or advertising project, the three decisions that matter are pixel pitch (how close the audience stands), brightness (whether the image survives direct sun) and cabinet sealing (whether it survives rain and dust). This page answers all three with the actual specification of the FB960 Series.

• Roadside and highway billboards — P8 or P10 for audiences 8–20 m away; 7,500 nits stays readable in daylight.
• Building façades and media walls — 960 × 960 mm cabinets tile in any width or height, so the screen follows the structure rather than the structure following the screen.
• Retail and shopping mall exteriors — full-colour content for promotions, wayfinding and brand campaigns.
• Transport advertising — airport, subway and terminal environments where the screen runs 18+ hours a day.
• Event and venue screens — temporary or semi-permanent installs that need a rugged cabinet.

Pixel pitch is the distance between LED pixels in millimetres. Smaller pitch means more pixels per square metre — sharper image, higher cost per square metre. As a working rule of thumb, viewers should stand roughly one metre away for every millimetre of pitch; below that distance the individual LEDs become visible.

Because all three pitches share the same 960 × 960 mm cabinet, you can specify one pitch for the whole screen today and keep the cabinet geometry identical if you expand or upgrade later.

Two numbers decide whether an outdoor advertising screen is usable: brightness and ingress protection.

7,500 nits is several times the brightness of a typical indoor screen. That headroom is what keeps text, logos and video legible when the sun is on the panel — the single most common failure of cheap outdoor LED screens.

IP65 means the cabinet is dust-tight and protected against water jets from any direction. Combined with an aluminium cabinet (no rust, lower weight than steel), it covers rain, humidity, dust and coastal salt air. For permanent outdoor advertising, IP65 is the practical minimum; anything lower will need servicing after the first wet season.

The screen supports CMS-based remote content management, so a campaign can be scheduled, swapped or regionalised without sending a technician to site. Content is pushed from the media player / control PC over the network; the cabinet itself is driven by standard receiving cards. If you run multiple billboard sites, content can be managed centrally and each site addressed individually.

Every unit ships with CE, RoHS and FCC compliance, and LVD and EMC test reports are available for EU procurement. Rated life is 100,000 hours — at 18 hours of daily operation that is roughly 15 years of panel life before brightness falls to the end-of-life threshold. Warranty is 2 years on the cabinet and modules.

Shenzhen Abxing Industrial Co., Ltd. has manufactured LED displays since 2017, is verified by Intertek, and holds a 4.9/5 rating across 3,442 store reviews with a 29% reorder rate. We support full customisation, drawing-based customisation and private label, run finished-product inspection with in-house QA/QC, and publish project case studies. For advertising operators, that means a supplier who can quote a screen, document it for a tender, and repeat the build across sites.